ENGLISH
29
DESCRIPTION
A.
Horizontal brace, larger diameter
B.
Vertical support (smaller diameter) and two
pins in one of the ends
C.
T piece
D.
Base foot
ASSEMBLY
Location
It is vital to place the pool in a suitable location before filling it with water. Choose a site that meets all
assembly instruction criteria to ensure problem-free assembly.
The ground must be firm, even (no tufts of grass, stones, etc.) and horizontal (max. 3° gradient).
WARNING!
There is a risk that the pool will leak, collapse or become misshapened if placed on
unsuitable ground. This can lead to serious injury or damage to property. Never use sand or other
material to level the ground underneath the pool.
RIGHT: Smooth, even ground
WRONG: Uneven, sloping ground
There must be no sticks, stones, sharp objects etc. where the pool is located.
Do not place the pool immediately below overhead lines or trees, or above buried pipes or cables.
IMPORTANT:
There must be an RCD-protected power outlet (110 or 230 VAC) close to the pool. The
pool must be at least 3 metres from the power outlet, but close enough for the filter pump power cord to
reach. Never use extension cords.
If possible, choose an open, sunny site. The sun helps to heat the water in the pool.
