ENGLISH
8
ENGLISH
SAFETY INSTRUCTIONS
Read the Operating Instructions carefully before use!
The lamp must be connected to an earthed mains supply.
Do not use the lamp if the power cord or plug is damaged in any way. For safety reasons, the
power cord must only be replaced or repaired by an authorised service centre. Consult your dealer.
Do not touch the lamp when it is on, or just after switching it off. It can get very hot.
Make sure the lamp is not connected to the mains when replacing the fluorescent tube.
Do not replace the fluorescent tube until it has cooled.
Make sure that the new tube has the same wattage as the old one.
Replace the cover immediately if it is damaged. Do not use a damaged lamp.
Keep the lamp out of the reach of children.
TECHNICAL DATA
Rated voltage
230 V/50 Hz
Output power
16 W
Safety class
II
Protection rating
IP54
Base 2-pin
GR8
Luminous flux
1050 lumens
OPERATION
Replace fluorescent tube
See illustration on the next page.
1.
Switch off the lamp and make sure that it is not connected to the mains supply.
2.
Carefully unscrew the screws holding the cover.
3. Remove
the
cover.
4.
Replace the damaged fluorescent tube with one with the same wattage. Do not touch the tube if it
is hot.
5.
Fix the cover with the screws.
