JUKI TL Series, Руководство по обслуживанию

Страница: 14 / 32

–
12
–
15. Drop-feed knob
❸ E-ring
❺ Wire installing plate asm.
❷ DF adjusting arm spring
❻ DF adjusting arm asm.
❶ Drop-feed knob
14. Hand lifter lever
❶ Hand lifter lever
❷ Hand lifter lever shaft
❸ M4 screw
❹ Drop feed knob shaft setscrew
❹ Hand lifter lever shaft set screw
ⓐ
Flat part
Disassembly Assembly Point
○ Set
❶
drop-feed knob to "NOT
FEED", remove
❹
drop feed
knob shaft setscrew, and remove
❸
E-ring of drop feed knob.
○ Remove
❷
DF adjusting arm
spring while removing
❻
DF ad-
justing arm asm..
○ Pass
❶
drop feed knob through
❺
wire installing plate.
○ Assemble
❷
DF adjusting arm spring
while assembling
❻
DF adjusting
arm asm..
○ Place
❸
E-ring to
❶
drop feed knob.
○ Assemble drop feed knob shaft with
❹
setscrew.
○ It is easy to remove
❷
spring
when
❶
drop-feed knob is
set to “NOT FEED” side.
Disassembly Assembly Point
○ Loosen hand lifter lever shaft setscrew ❹ .
○ Insert M4 screw ❸ into tapped hole in
hand lifter lever shaft ❷ by 3 to 4 screw
threads.
○ Hold screw head and draw out the screw.
○ At the same time, also draw out hand lift
-
er lever shaft.
○ Remove hand lifter lever ❶ .
○ Put hand lifter lever shaft ❷ into
the hole in the frame.
○ Secure hand lifter lever shaft ❷
by tightening hand lifter lever
shaft setscrew
❹ in such a way
that the tip of setscrew ❹ comes
in contact with the flat part on
hand lifter lever shaft
❷ .
○ End face ⓐ of hand lifter
lever shaft ❷ should not
jut out from the frame
surface.