JUKI SC-956, Инструкция по эксплуатации

Страница: 37 / 185

– 32 –
4-6. LED hand light
* This LED is intended to improve opera -
bility of the sewing machine and is not
intended for maintenance.
The sewing machine is provided as standard with
an LED light which illuminates the needle entry
area.
Intensity adjustment and turn-off of the light is
carried out by pressing switch ① . Every time the
switch is pressed, the light is adjusted in intensity
in six steps and is turned off in turn.
[Change of intensity]
1 ⇒ . . . 5 ⇒ 6 ⇒ 1
Bright ⇒ . . . Dim ⇒ Off ⇒ Bright
In this way, every time the switch
①
is pressed,
the hand lamp status is changed in repetition.
[Change in color of the LED light]
1) When switch ① is held pressed for three seconds, the sewing machine enters the light color
changeover mode. The light color can be changed over in 12 stages by pressing ① .
1
⇒
. . . 6
⇒
7
⇒
. . . 12
⇒
1
White 50 %,
yellow 50 %
⇒
. . . Yellow 100 %
⇒
White 100 %
⇒
. . . White 60 %,
yellow 40 %
⇒
White 50 %,
yellow 50 %
2) If the sewing machine is not operated for three seconds under the light color changeover mode, the
light color changeover mode will be automatically terminated.
①
WARNING :
In order to protect against personal injury due to unexpected start of the sewing machine, never
bring hands near the needle entry area or place foot on the pedal during the adjustment of intensity
of the LED.