JUKI MO-6800D/DD20 Series, Инструкция по эксплуатации

Страница: 33 / 77

– 30 –
6-1. Operation panel
6. OPERATION PROCEDURE
❶
❷
❼
❽
❾
❹
A
❸
❻
❺
No.
How to press
the button
Function
❶
Short time This button is used for changing over the current mode to the function setting
mode.
Long time This button is used for setting the time.
❷
Short time This button is used for confirming the setting you have changed.
❸
Short time This button is used for increasing the maximum sewing speed.
Long time Continuous input is enabled
❹
Short time This button is used for decreasing the maximum sewing speed.
Long time Continuous input is enabled
❺
Short time This button is used for increasing the current numerical value on the function
setting screen.
Long time Continuous input is enabled
❻
Short time This button is used for decreasing the brightness of the hand illumination LED.
Long time Keeping this button held pressed changes the color of the hand illumination LED.
❼
Short time This button is used for changing the setting of the suction device.
Long time Keeping this button held pressed changes over the sewing mode.
❽
Short time This button is used for changing the setting of the presser foot.
Long time Keeping this button held pressed changes the setting of the thread trimmer (only
for the DD23 model).