JUKI MF-7900-E11, Инструкция по эксплуатации

Страница: 7 / 18

– 5 –
❷
❸
❶
8. ADJUSTMENT PROCEDURE OF FRONT-UP AMOUNT OF THE PRESSER FOOT
When sewing a thick rubber sheet or the like together, fab -
ric can be smoothly fed by raising the front of presser foot
❶ . Loosen nut ❷ , turn setscrew ❸ to the right (clockwise),
and raise the front of presser foot for adjustment.
9. ADJUSTMENT PROCEDURE OF THE POSITION OF THE TAPE GUIDE
Loosen setscrew
❶
, and move tape guide base
❷
to the
right and left to adjust the position of the tape.
❷
❶
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.