JUKI MF-7500-E11, Инструкция по эксплуатации, Страница: 9 / 10

– 7 –
Loosen setscrew ❼ move tape guide ❻ to the right and left to adjust the width of the tape.
❷
❸
❹
❺
❻
❼
❾
❽
❶
11.ADJUSTMENT PROCEDURE OF THE POSITION OF THE TAPE GUIDE
12.ADJUSTMENT PROCEDURE OF THE WIDTH OF THE TAPE GUIDE
13.ADJUSTMENT PROCEDURE OF THE FABRIC PRESSER
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
When sewing a thick rubber sheet or the like together, fabric can be smoothly fed by raising the front of
presser foot
❶ . Loosen nut ❷ , turn setscrew ❸ to the right (clockwise), and raise the front ❶ of presser
foot for adjustment.
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
Loosen setscrew
❹
, and move tape guide base
❺
to the right and left to adjust the position of the tape.
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
Loosen setscrew ❽ and adjust the knife cutting position so that moving knife enters between knife guide ❾ .
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the follow-
ing work after turning the power off and ascertaining that the motor is at rest.
10.ADJUSTMENT PROCEDURE OF FRONT-UP AMOUNT OF THE PRESSER FOOT