74
(3) Communication mode
The matters below can be performed n the communcaton mode.
1) Sewng machne data server utlty (hereafter : SU-1) or vector form (VDT) data from meda can be regs-
tered to non-regstered No. of custom pattern.
2) Custom pattern can be changed to the vector form and be uploaded to SU-1 or the meda.
3) Parameter data (EPD) can be overwrtten and regstered to the condensaton custom pattern from SU-1
or the meda.
4) Condensaton custom pattern can be uploaded to SU-1 or the meda.
* For settng of the communcaton wth SU-1, refer to the Instructon Manual for SU-1.
[Maintenance personnel level]
1) Turn ON the power. When the needle bar s not n the UP poston, turn the handwheel to brng the needle
bar to ts UP poston.
2) Press swtch
1
for approxmately three seconds to dsplay the nformaton screen.
2
: Ver dsplay For the detals, refer to the Engneer’s Manual.
3
: Sewng common data
4
: Functon settng Refer to 6-16 Functon settng procedure.
5
: Sewng management nformaton
6
: Communcaton mode
7
: Hook adjustng mode Refer to 8-6 Hook adjustng mode.
8
: Meda format For the detals, refer to the Engneer’s Manual.
* When the meda format s executed, all of the data that have been recorded at present dsappear.
Be careful not to use t other than ntalzaton of the meda.
■
Information screen (Maintenance personnel level)
i
u
y
t
r
e
w
q
