8
Connect cords n the followng order.
5) Insert yellow/green earth cord
1
comng from
the machne head nsde the electrcal box
through front cover through hole B, and pass t
through cord clamp “b” as llustrated and tghten
t wth screw at the poston
2
n the llustraton.
6) Insert whte square connector 9P black cord
3
comng from the machne head nsde the electr-
cal box through front cover through hole B, and
nsert t nto connector CN38
4
of the crcut
board attached to the front cover.
7) Insert whte connector 4P black cord
5
comng
from the machne head nsde the electrcal box
through front cover through hole B, and nsert t
nto connector CN21
6
of the crcut board at-
tached to the front cover.
8) Insert whte connector 26P cord
7
comng from
the control panel nsde the electrcal box through
front cover through hole B, pass t through cord
clamps “b”, “c” and “d”, nsert t nto connector
CN34
8
, and lock t.
2
b
B
1
3
B
4
5
6
7
8
c
b
d
(2) Connecting the connectors
• Each connector has the inserting direction. Check the direction and securely insert it. (In
case of the type with lock, insert up to the lock.)
• If the connector is forcibly inserted, trouble or accident will be caused.
• Never pull out the connectors inserted at the time of delivery.
• The sewing machine fails to work if the connectors are not properly inserted. Not only the
problem such as the error warning or the like but also breakage of the sewing machine or
electrical box will occur.
B
B
