7
(1) Preparation of wiring
1) Pass the cords comng from the machne head to
the undersde of the table through hole A n the
table.
2) Loosen screws D and lft cord presser plate C of
cord passng hole B located on the front cover to
the top and temporarly tghten the plate.
3) Remove four screws E fxng the rear cover of
the electrcal box. When openng the rear cover,
pressng t wth your hands, slowly open t by ap-
proximately 90˚ until it stops as illustrated.
Be sure to lend your hand to the rear
cover in order not to let the rear cover
fall. In addition, do not apply force to the
rear cover opened.
4) Remove the locks of cord clamps a, b, c, d, e, and f.
A
C
d
a
b
E
B
D
e
f
c
4-8. Connecting the cords
WArNING :
• To prevent personal injury caused by abrupt start of the sewing machine, carry out the work after turning
oFF the power switch and a lapse of 5 minutes or more.
• To prevent damage of device caused by maloperation and wrong specifications, be sure to connect all the
corresponding connectors to the specified places.
• To prevent personal injury caused by maloperation, be sure to lock the connector with lock.
• As for the details of handling respective devices, read carefully the Instruction Manuals supplied with the
devices before handling the devices.
Slowly
How to remove the cord clamp
1
Lightly pressing
2
Pull down the clamp.
3
the clamp goes up.
2
3
1
1
* See P.11 for how to lock the cord clamp.
