JUKI LU-2220N-7, Инструкция по эксплуатации

Страница: 6 / 36

− 3 −
) Fix belt cover (rear)
1
on the arm with screws
2
.
2) Fit belt cover (front)
3
to notch (upper)
A
and
notch (lower)
B
of the belt cover (rear).
3) Fix belt cover (front)
3
with screws
4
and
5
.
4) Fix belt cover auxiliary plate
6
at the position of
0 mm from the rear end with wood screws
7
when there is a clearance of 2.5 mm between the
belt cover and the auxiliary plate.
5) When tilting the machine head, loosen wood
screws
7
and move the belt cover auxiliary plate
in the direction of the arrow until it stops. Then, tilt
the machine head.
After attaching the belt cover, confirm
whether or not the respective cords do
not come in contact with the belt and
the handwheel. Disconnection of the
cords will result when they come in
contact with one another.
5. ATTACHING THE BELT COVER
4
A
4
1
3
5
B
2
Notch (upper)
Notch (lower)
10 mm
2.5 mm
7
6
1
2
4. INSTALLING THE SYNCHRONIZER SUPPORT ROD
) Attach synchronizer support rod
1
to the arm
using attaching nut
2
.
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.