−
29
−
[Example]
How to adapt the button feeder components to the following button changing
ø2
ø10
2.6 mm
1.8 mm
ø15
3.2 mm
ø2
3.2 mm
3 mm
A. Button carrier and sewing width need to be changed since the distance between the center of holes (2.6 → 3.2) in a
button and the numer of holes in a button (2 → 4) of the two buttons are different.
B. The feed plate needs to be adjusted in the vertical direction since the button thickness changes from 1.8 to 3.
C. The hole of the feed plate to be used needs to be changed from the small hole to the medium hole, and the adjusting
plate should be adjusted since the outside diameter of button changes from ø10 to ø15 mm.
D. It is necessary to adjust the feeder bowl components.
Whenever changing the button to be used, check first whether or not the aforementioned changes, A, B and C, in
the components are necessary. Then adjust the components, if necessary.
(3) When the outside diameter of button changes (
)
○
Adjust so that buttons in the feeder bowl smoothly flow and the selector plate discriminates the right-sided buttons from
the wrong-sided buttons without fail.
○
Adjust the feed plate A in the radial direction.
●
The feed plate A has three holes with different diameters,
i.e.,large, medium and small.
1) The small hole is used for buttons of which outside
diameter is ø10 mm to ø11.5 mm.
The medium hole is used for buttons of which outside
diameter is ø11.5 mm to ø15 mm.
The large hole is used for buttons of which outside
diameter is ø15 mm to 18 mm.
However, the aforementioned outside diameters of the
respective holes should be used as reference.
2) Adjust the adjusting plate so that E becomes 0 when
setting a button in the hole.
3) When changing over the hole to be used between the
small one and the medium one, move the frame of the
feed plate A accordingly to allow the button to be used to
fit in the hole selected.
(Caution)
Be sure not to excessively tighten the screw in the
feed plate A (made of plastic).
Adjusting plate
Button
E
Feed plate A
Содержание LK1903B-311
Страница 1: ...LK 1903B BR35 INSTRUCTION MANUAL ...
