JUKI LK-1900B/IP-420, Инструкция по эксплуатации

Страница: 48 / 144

– 44 –
17. CHANGING CONTENTS OF PATTERN BUTTON
① Display the data input screen at the time of pattern button
selection.
Only in case of the data input screen (blue) at the time of
pattern selection, it is possible to change the contents of
pattern. In case of the sewing screen (green), press READY key
to display the data input screen at the time of the pattern
button selection.
② Display the pattern button data change screen.
When PATTERN BUTTON DATA CHANGE button
A
is
pressed, the pattern button data change screen is displayed.
When each button from B to M is pressed, the item data input screen is displayed. When the buttons of
I and J are pressed, Folder Nos. and With/without thread clamp are changed over.
③ Display the input screen of the item data you desire to change.
Data which are possible to be changed are 12 items below.
A
I
D
F
H
J
B
C
E
G
K
M L
Item Input range
Initial
value
B
Scale rate in X
direction
20 to 200 (%) 100
C
Scale rate in Y
direction
20 to 200 (%) 100
D Thread tension 0 to 200 50
E
Max. speed
limitation
1900 ： 400 to 3200 (sti/min) 3200
1901 and 1902 : 400 to 3000 (sti/min) 3000
1903 and 1900 double-capacity hook :
400 to 2700 (sti/min) 2700
F
Travel amount in X
direction
–20.0 to 20.0 (mm) 0.0
G
Travel amount in Y
direction
–20.0 to 10.0 (mm) 0.0
H Sewing shape – –
I Folder No. 1 to 5 –
J Thread clamp With/without With
K 2-step stroke height 50 to 90 70
L
Last stitch position
X-travel amount
– 2.0 to 2.0 0.0
M
Last stitch position
Y-travel amount
– 2.0 to 2.0 0.0
* B Scale rate in X direction and C Scale rate in Y direction can be changed to the actual size value input
by selection of memory switch .
* Range of max input of max. limitation speed E and the initial value are determined with memory switch .
* When the prohibition of thread clamp is set with memory switch , the button of thread clamp J is not displayed.
* For 2-step work clamp height stroke K , display/hide can be selected with memory switch . (Initial
setting: Hide)
When "Hide" is selected, the stroke is not displayed on the data edit screen.
* For the last stitch position X-travel amount
L and the last stitch position Y-travel amount M , display/hide
can be selected with memory switch . (Initial setting: Hide)
When "Hide" is selected, the stroke is not displayed on the data edit screen.