JUKI LK-1900B/IP-420, Инструкция по эксплуатации

Страница: 46 / 144

– 42 –
16. PERFORMING PATTERN BUTTON No. SELECTION
①
Display the data input screen.
In case of the data input screen (blue), it is
possible to select the pattern button No. In case
of the sewing screen (green), press READY key
to display the data input screen.
A
F
C
D
E
B
16-1 Selection from the data input screen
② Call the pattern button No. selection screen.
When PATTERN BUTTON No. SELECTION
button A is pressed, the pattern button No.
selection screen is displayed. Pattern button No.
which is selected at present and the contents are
displayed on the upper part of the screen, and the
list of the pattern button No. buttons which have
been registered is displayed on the lower part of
the screen.
③
Select the pattern button No.
When UP or DOWN SCROLL button
B is pressed, pattern button No. buttons C which
have been registered are changed over in order.
The contents of sewing data which have been
inputted in the pattern button No. are displayed
in the button. Here, press the pattern button No.
button
C
you desire to select.
④ Determine the pattern button No.
When ENTER button D is pressed, the
pattern button No. selection screen is closed and
the selection is finished.
* When you desire to delete the pattern button which has been registered, press DELETE E button.
However, the pattern buttons which are registered to the combination sewing cannot be deleted.
* For the pattern No. to be displayed, press FOLDER SELECTION
F
button and pattern button Nos.
which have been stored in the specified folder are displayed in the list.
When the folder No. is not displayed, all pattern Nos. which have been registered are displayed.