JUKI LH-3500 Series, Инструкция по эксплуатации, Страница: 29 / 50

– 27 –
At the tme of delvery of LH-3568 and 3568-7,
3588, 3588-7 the knee lfter or AK devce s not
nterlocked wth the thread tenson release of
thread tenson controller. When releasng the
thread tenson, press lever
1
to rse the dsks.
• When interlocking the thread tension release
Remove the wper solenod n case of the machne
wth wper. Remove the cap at the back, loosen
screw
2
, move screw
2
n the drecton of arrow
up to the end of slot of lftng lnk
3
, and fix it.
When interlocking the thread tension
release :
1. Thread slacks when turning cloth at the
corner stitching, and sewing trouble of
thread tension release may occur .
2. When the wiper is not used at the time
of thread trimming, needle thread may
be drawn out when removing cloth.
3. Just loosen screw
2
, and do not
remove it.
1
3
2
1
1
5-6. One-touch manual reverse feed (One-touch reverse feed type)
・
How to use
) Press swtch
1
, and the sewng machne wll mmedately run n the reverse drecton to perform
the reverse feed sttchng.
2) Reverse sttchng s made as long as you keep pressng the swtch.
3) Release the swtch, and the sewng machne wll run n the normal drecton.
[LH-3568, 3588-7] [LH-3528, 3528-7, 3578-7]
5-5. Thread tension release changeover when using the knee lifter