4-5. List of memory switch data
No.
Item
Setting range
Unit
U001
Soft-start function
The initial value differs with the machine head. (0: OFF)
0 to 9
Stitch
U007
Bobbin thread count-down unit
0: 10 stitches / 1: 15 stitches / 2: 20 stitches
0 to 2
ー
U008
Reverse feed stitching speed
The initial value differs with the machine head.
The number of revolutions set with this memory switch is given precedence
even if it is lower than the lowest speed by pedal.
150 to 3000
sti/min
U013
Bobbin thread count stop function
0: Sewing machine start prohibition function is disabled even when the
counter completes counting (negative value).
1: When the counter completes counting, the sewing machine start after
thread trimming is prohibited.
2: When the counter completes counting, the sewing machine temporarily
stops and the start of sewing machine after thread trimming is prohibited.
* Note that the prohibition function is disabled in the case the initial value of
counter is 0 (zero).
0 to 2
ー
U014
Sewing count function
1: Automatic sewing counter / 2: Sewing counter switch input
1 to 2
ー
U021
Presser foot lift when the pedal is in its neutral position
0: Disabled / 1: Enabled
0 to 1
ー
U025
Operation after manual turning (thread trimming)
This memory switch is used for setting the thread trimmer operation after the
sewing machine has moved from its upper/lower stop position by manual
turning of handwheel.
0: Permitted / 1: Prohibited
0 to 1
ー
U035
Minimum speed of the pedal
The maximum number of revolutions during thread trimming differs with the
machine head.
150 to Max.
of thread
trimming
sti/min
U036
Speed during thread trimming
The maximum number of revolutions during thread trimming differs with the
machine head.
150 to Max.
of thread
trimming
sti/min
U037
Speed during soft start
The maximum number of revolutions during soft start differs with the machine head.
The number of revolutions set with this memory switch is given precedence
even if it is lower than the lowest speed by pedal.
100 to Max.
sti/min
U038
Speed during one-shot stitching
The maximum number of revolutions during soft start differs with the machine head.
100 to Max.
sti/min
U039
Start position of rotation
10 to 5000
ー
U040
Start position of acceleration
10 to 1000
ー
U041
Start position of lifting of presser foot
-500 to -10
ー
U042
Start position of lowering of presser foot
10 to 500
ー
U043
Start position of thread trimming
-1000 to -100
ー
U044
Position that maximum sewing speed is reached
10 to 15000
ー
U045
Pedal neutral-position correction value
-150 to 150
ー
– 48 –
Содержание DDL-9000C-S Series
Страница 1: ...DDL 9000C S INSTRUCTION MANUAL ...