JUKI DDL-8100B-7 Series, Инструкция по эксплуатации

Страница: 32 / 50

– 30 –
No. Item Description Setting range Default
Ref.
page
182 Operation to be con-
ducted when the target
value is achieved
Operation to be carried out when the sewing counter of the production
support function reaches the target value is set.
0 : No operation
1 : The sewing machine does not operate even if the pedal is de-
pressed.
* In the case the function No. 13 is used, the setting of the function No.
182 is disabled.
0/1
0
183 Setting of the number of
times of thread trimming
for the production sup-
port function
The number of times of thread trimming at which the sewing counter of
the production support function stops counting is set.
0 : The sewing counter stops counting when a value is entered to the
sewing counter using the optional input/output function.
1 to 20 : The sewing counter stops counting according to the preset
number of times of thread trimming
0 to 20
1
186 Soft start resetting angle An angle at which the start is reset is set.
* This setting is enabled when the thread clamp operates.
180 to 900
7 8 0
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time of
delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated. If it is necessary to
change the set value, please purchase the Engineer’s Manual and follow the instructions.