– 53 –
The sewng products stacked by the stacker can be taken out.
1
release the stacker presser of the stacker.
When MATERIAL RELEASE button
A
s pressed on
the sewng screen, the stacker presser of the stacker opens
to allow the sewng product n the stacker to be taken out.
At the same tme, the stacker release screen s dsplayed.
2
return the stacker presser of the stacker
When the CANCEL button
B
s pressed, the screen s
closed and the stacker presser of the stacker returns to ts
home poston.
Sewng cannot be started whle the stacker release screen
s dsplayed.
A
B
Stacker release screen
Sewng screen
(1) taking out the material from the stacker
(2) adjusting the stack-full sensor
The stacker of ths devce s provded wth the functon that detects the stackng heght of sewng prod-
ucts stacked on the cloth stackng board and stops the operaton of the devce.
）
When sensor
2
nstalled on work clamp
cylnder
1
detects that the heght of the
stacked products reaches the lmt, the
stack-full error "E099" s dsplayed on the
operaton panel. After that, the START
swtch s dsabled.
To reset, press the RESET button
A
on the error screen.
2
1
2-15. Stacker operation (taking out the material)
A