– 64 –
2-22. Copying pattern button
The sewing data of the pattern button No. which has already been registered can be copied to the pat-
tern button No. which is not registered. Overwriting copy of the pattern button is prohibited. When you
desire to overwrite, perform it after deleting the pattern button once.
→
“II-2-20. Performing pattern button No. selection” p.61
①
Display the data input screen.
Only in case of the data input screen (blue) at the time of
pattern button selection, it is possible to copy. In case of the
sewing screen (green), press READY switch
to display
the data input screen (blue).
②
Call the pattern copy screen.
When PATTERN BUTTON COPY button
A
is pressed,
the pattern button copy (copy source selection) screen is dis-
played.
A
D
G
F
E
H
C
B
④
Input the pattern No. of copy destination.
Input the pattern button No. of copy destination with ten keys
D
.
Pattern button No. which is not used yet can be retrieved with
– and + buttons
(
F
and
E
).
In addition, the folder to be stored can be selected with FOLD-
ER SELECTION button
G
.
⑤
Start copying.
When ENTER button
H
is pressed, copying starts. The
copied pattern button No. in the selection state returns to the
pattern button copy (copy source selection) screen after ap-
proximately two seconds.
* Combination data can be copied in the same way.
③
Select the pattern No. of copy source.
Select the pattern button No. of copy source from the pattern
button list button
B
.
Next, press COPY DESTINATION INPUT button
C
and
the copy destination input screen is displayed.
