– 79 –
2-29. Using 2-step stroke function
2-step stroke function can be used by changing setting of memory
switches
and
.
①
Display the memory switch data list screen.
Display the memory switch data list screen.
"II-2-25. Changing memory switch data" p.71
how to display the memory switch data list screen.
②
Change the memory switch data. (Make the 2-step stroke
function effective.)
Select
or
on the memory switch list screen.
For the respective switches, set the data as described below.
Solid presser
: 8
→
9
For the 2-step stroke type, data have already been factory-ad-
justed.
When using the 2-step stroke function, you can stop the presser at the intermediate position you de-
sire.
(1) Setting of 2-step stroke function
(2) Setting of 2-step stroke position
In the setting of 2-step stroke position, perform the adjustment of intermediate position to stop the
presser. As the setting value is increased, the presser stops at the lower position.
For the pneumatic type presser, the presser gradually comes down with the lapse of time
after stopping at the 2-step stroke position. In this case, repeat the operation since the
presser goes up when the pedal is depressed again.
[When setting 2-step stroke position of user's pattern]
2-step stroke position used in the user's pattern can be set with
memory switch
.
①
Display the memory switch data list screen.
Display the memory switch data list screen.
"II-2-25. Changing memory switch data" p.71
for
how to display the memory switch data list screen.
②
Change the memory switch data.
Select
from the memory switch list screen and set
2-step stroke position.
Decreasing the set value increases the intermediate height, or
increasing it decreases the height.
Presser used
Input range
Initial value
Pneumatic type
10 to 300 (msec)
35
*1
*1
: The initial value is subject to change depending on the
factory setting at the time of delivery.
