– 95 –
2-7-5. Taking in plural data together
For the vector data, M3 data, sewing standard format data and cycle pattern data, two or more pieces
of data can be selected at a time and written collectively.
The write destination file name becomes the same one as the selected file.
①
Display the data to be written on the file selection
screen
Select file name
A
of the data to be written on the file selec
-
tion screen.
* Two or more files can be selected.
The file being selected can be unselected by pressing the file
name again.
The selection status of the button can be displayed in reverse
video with INVERSION button
B
.
②
Start the communication
When COMMUNICATION START button
C
is pressed, the data communi-
cation starts.
On the screen during communication,
the file name(s) that are being commu
-
nicated, the total number of pieces of
written data and the number of pieces of
data communication of which are com-
pleted are displayed.
* In the case a file is written to the existing file, the overwrite
confirmation screen is displayed on a file-by-file basis.
When you want to overwrite the existing file, press ENTER
button
D
.
If you want to overwrite all existing data without displaying the
overwrite confirmation screen in the subsequent steps of pro
-
cedure, ENTER ALL button
E
.
D
E
C
B
A
