– 95 –
If you try to lift the presser foot in the lift prohibition area, E384
presser foot lift prohibition error will be displayed.
Press pattern move button
A
to display the pattern move
screen. Move the pattern on the pattern move screen using the di-
rection key
B
, and press cancel button
C
. Then, an additional
second origin can be input.
This additional second origin is erased when the
screen returns to the data input screen.
In the case the error occurs in the state where moving
of the pattern is disabled, the pattern move button will
not be displayed.
2-34. Precautions to be taken when creating patterns
Since the presser foot lift prohibition area is determined with reference to the set values of the
feed movable range from K056 to K058, the area is affected if those set values are changed.
In the presser foot lift prohibition area shown in the figure below, the presser foot cannot be lifted
since the feeding frame and the needle thread suction device interfere with each other.
For the pattern the sewing starting point of which is set within the presser foot lift prohibition area,
set a second origin outside the presser foot lift prohibition area using the main unit input function.
－
152mm (K057)
152mm (K056)
Presser foot lift prohibition area
20mm
20mm
40mm
102mm (K058)
－
102mm
Operator's side
Origin
A
C
B
