– 42 –
A
⑤
Finish checking the shape.
When PRESSER INITIAL POSITION button
H
is
pressed, the work clamp moves to the sewing start position
and the screen is restored to the sewing screen. When CAN-
CEL button
I
is pressed, the screen is also restored to the
sewing screen. When the work clamp does not rest at the sew-
ing start or end position, sewing can be started by depressing
the foot switch before sewing shape checking is not completed.
2-10. Performing modification of needle entry point
(1) Editing the intermediate presser height
Press STEP SEWING button
A
on the sewing screen to
display the step sewing screen.
The sewing shape is displayed at the center of the screen. The
current point, sewing start position and sewing end position
are respectively represented by (pink circle), (blue dot) and
(pink dot).
Press MODE SELECT button
B
to select the intermedi-
ate presser mode.
I
H
B
