JUKI AMS-210E-1306, Инструкция по эксплуатации, Страница: 52 / 128

– 48 –
2-15. Performing new register of pattern button
1
Display the data input screen.
Only in case of the data input screen (blue), new register of
the pattern button can be performed. In case of the sewing
screen (green), press READY switch
and display the
data input screen (blue).
2
Call the new register of pattern button screen.
Press NEW REGISTER button
A
and the new
register
of pattern button screen is displayed.
3
Input the pattern button No.
Input the pattern button No. you desire to newly register with
the ten keys
B
. When the pattern No. which has been already
registered is inputted, the sewing shape which has been
already registered is displayed in the upper part of the screen.
Select the pattern button No. which is not displayed and has
not been registered. New register to the pattern button No.
which has been already registered is prohibited.
It is possible to retrieve the pattern button No. which has not
been registered with the “+” or “–” button
(
C
and
D
).
4
Select the folder to be stored.
It is possible for the pattern buttons to be stored in five folders.
As many as 10 pattern buttons can be stored for one folder.
The folder to store the button can be selected with FOLDER
SELECTION button
E
.
5
Determine the pattern No.
Press ENTER button
F
to determine the pattern button
No. to be newly registered and the data input screen at the
time of pattern button selection is displayed.
Press P1 to P50 key while the sewing screen is displayed or the sewing LED lights
up and the presser comes down. Be careful that your fingers are not caught in the
presser.
A
B
D C
E
F