JUKI AMS-210E-1306, Инструкция по эксплуатации

Страница: 45 / 128

– 41 –
1
Display the pattern button move screen.
When PATTERN BUTTON MOVE button
A
is pressed,
the pattern button move screen is displayed.
1
Release the error.
Press RESET button
A
to release the error and the
sewing screen is displayed.
(2) To perform re-sewing from the start
3
Return to the origin.
When RETURN TO ORIGIN button
F
is pressed, the
pop-up is closed, the sewing screen is displayed and the
machine returns to the position of the start of sewing.
4
Perform again the sewing work from the start.
When the pedal is depressed, sewing starts again.
2
Perform thread trimming.
Press THREAD TRIM button
B
to perform thread
trimming.
When PRESSER UP button
G
is pressed, the presser
goes up. Turn OFF the power since the operation afterwards
cannot be performed.
When thread trimming is performed, INTERMEDIATE
PRESSER UP/DOWN button
C
, FEED BACKWARD
button
D
, FEED FORWARD button
E
, and
RETURN TO ORIGIN button
F
are displayed in the
screen.
1. When the presser is raised and the operation is
stopped on the way because of the trouble of
forgetting to enter the bobbin case or the like,
press PRESSER UP button
G
and turn
OFF the power.
2. PRESSER UP button
G
is not displayed
when the presser is of pneumatic type.
2-10. When setting of sewing product is difficult because of interruption of needle tip
A
C
E
F
D
A
B
G