JUKI AC-172N-1790, Инструкция по эксплуатации

Страница: 80 / 102

− 76 −
Ths sewng machne can automatcally actuate the knfe plural tmes and sew a buttonhole larger than the
sze of knfe by settng the sze of knfe attached from the operaton panel. Set and use ths functon when
sewng varous sewng shapes wthout replacng the knfe.
2-14. Setting procedure of plural motions of knife
A
1
C
2
!0
4
!1
B
1
!0 !1
D
1
Set the mode to the input mode.
When the back-lght of LCD dsplay
1
shows
the nput mode n blue color, t s possble to edt
the memory swtch data. When the back-lght
shows the sewng mode n green color, press
READY key
2
to change over to the nput
mode.
2
Input the size of cloth cutting knife
Press MODE key
4
to dsplay memory swtch
data (level 1) edt screen A . Press ITEM SELECTION
key
!0
to call Cloth cuttng knfe
sze B . Then set sze C of knfe attached wth DATA
CHANGE key
!1
. => For the detals, refer
to "
@
-2-16. Memory switch data list" p.78 .
3
Set the function of the plural motions of
cloth cutting knife to effective.
Next, press agan ITEM SELECTION key
!0
to call Functon of the
plural motons of cloth cuttng knfe D . Then
set the plural motons of cloth cuttng knfe to
the effectve status wth DATA CHANGE key
!1
. For the detals, refer to "
@
-2-16.
Memory switch data list" p.78 .
4
Perform sewing.
Press READY key
2
, and the back-
lght of LCD dsplay
1
becomes green. Then
t s possble to sew. At ths tme, when S02
Cloth cuttng length s set to a sze larger
than U18 Cloth cuttng knfe sze whch has
been set above, the plural motons of knfe s
automatcally performed for sewng.
* If a buttonhole smaller than the sze of knfe
attached s desred to be sewn, error 489 wll be
dsplayed.
Sewing data
S02 Cloth cut length
1st time
Memory switch data
list (level 1)
U18 Cloth cutting
knife size
2nd time
3rd time