– 78 –
1
Displaying the data entry screen
Only on the data entry screen (pnk), the cycle-sewng data
number can be selected. On the sewng screen (green), press
the set ready key
to dsplay the data entry screen (pnk).
nce no pattern number s regstered n the ntal screen, the
first pattern selection button is displayed in the blank state.
2
Displaying the pattern number selection screen
When you press pattern selecton
A
, the pattern num-
ber selecton screen s dsplayed.
3
selecting a pattern number
Every tme you press up/down scroll buttons
B
,
the regstered pattern number button
C
changes over one
after another.
It s also possble to brng up the pattern number entry screen
wth number nput button
D
and drectly enter the pat-
tern number.
The button dsplays the descrpton of the pattern data.
Now, press pattern No. button you want to select.
4
Confirming the pattern number
When you press enter button
E
, the pattern number
selection screen is closed to finish selection.
5
repeating steps of procedure
2
through
4
by the num-
ber of patterns you want to register
Once the first registration is confirmed, the 2nd pattern selec
-
ton button
F
wll be dsplayed.
Repeat steps of procedure
2
through
4
by the number of
patterns you want to regster.
You can select the pattern No. button by pressng up/down
scroll buttons
G
. The selected patter No. button s
dsplayed n pnk
.
When you press pattern No. button
H
shown on the dsplay, the
belt loop pattern data entry screen s dsplayed. On ths screen,
you can set each parameter of the pattern data separately.
If you change the parameter on the belt-loop pattern data
entry screen of the cycle sewng screen, the parameter of
the orgnal belt-loop pattern wll be changed. When settng a
parameter, the confirmation screen M589 is displayed. Press
enter button
E
as long as no problem wll be caused by
changng the parameter.
→
Refer to
"
-2-6. How to change the belt loop length",
for detals.
When the combned data you have created requres several
screens, you can dsplay the next screen wth screen scroll
button
I
.
(2) Method to create the cycle-sewing data
A
C
B
F
E
D
H
G
I
