Operation
4.3.2 Manually close or open leak-
age protection
Close leakage protection:
1.
Press
Menu
key.
2.
Using the arrow keys, select menu item
Close
and press key
OK
. The following
appears on the display:
Leakage protect
close <OK>
3.
Press
OK
to confirm. The following
appears on the display in an alternating
manner (with a yellow background):
Leakage protect
closed
To open
press <OK>
Water supply is shut off by the leakage
protection system.
INFO_NO_HEADER
The
Menu
key is deactivated in
this state.
To open the leakage protection system:
Press
OK
key.
The leakage protection system opens
for water supply. The default status dis-
play appears.
4.3.3 Temporary deactivation of
the leakage protection (sleep-
mode)
Situations in which large water volumes are
required on a one-off basis, e.g.
•
Watering the garden
•
Filling the swimming pool
•
Filling the garden pond
may require the switching off of limit value
monitoring. This is referred to as "Sleep
mode".
INFO_NO_HEADER
No monitoring of water consumption
takes place in sleep mode.
Activation of sleep mode:
1.
Press
Menu
key.
2.
Select
sleep mode
using the arrow keys
and confirm with the
OK
key.
The following appears on the display:
Start
sleep mode <OK>
3.
Press
OK
to confirm.
Sleep mode starts. The following
appears on the display in an alternating
manner (with a yellow background):
Leakage protect.
6 hours off
To end
press <OK>
The countdown of the displayed sleep
mode time runs. During this time, limit
value monitoring is paused.
1703593 • 2022/10
JUDO JPCS
15
