manualshive.com logo in svg

Judd Communications Depth Sensor, Руководство пользователя

Поделиться
Скачать
Judd Communications Depth Sensor Скачать руководство пользователя страница 1

Judd Communications Depth Sensor

 

 

Judd Communications 

2248 E. Lauri Kay Drive 

Salt Lake City, Utah 84124 

Phone (801)424-2889 

Fax (801)424-1528 

E-Mail 

[email protected]

 

http://www.juddcom.com

 

 

SPECIFICATIONS 

Power:

 +12 to 18 VDC, 50 mA     

(maximum sample time 2.6 seconds) 
 

Output:

 0 to 2.5 or 0 to 5 VDC 

 
Range:

 .5 to 10 meters (1.6 to 32.8 feet) 

 
Beam width:

 22 degrees 

 
Accuracy:

 

±

 1 cm or .4 % distance to target 

 
Resolution:

 3 mm ( .12 inches) 

 
Temp. range:

 -40

°

 to + 70

°

C ( -40

°

 to 158

°

F) 

 
Size:

 8 x 8 x 13 cm (3 x 3 x 5 inches) 

 
Weight:

  .6 kg (1.3 lbs.)  

 
Mounting:

 1/2 inch threaded pipe 

 
Cable length:

 7.6 meters (25 feet) 

 
Max. cable length:

 304 meters (1000 feet) 

 
Temperature Sensor Accuracy:

 

±

 .5

°

C, -40 to +85

°

C 

 
Temperature Sensor Resolution:

 .5

°

C 

INTRODUCTION 

The Judd Communications Depth Sensor is an inexpensive solution for remotely measuring snow depth or 
water levels. The sensor measures the distance from the sensor to a target. The sensor works by 
measuring the time required for an ultrasonic pulse to travel to and from a target surface. An integrated 
temperature probe with solar radiation shield, provides an air temperature measurement for properly 
compensating the distance measured. An embedded microcontroller calculates a temperature 
compensated distance and performs error checking. 
 
Both distance and air temperature can be output as an analog signal between 0 to 2.5 Volts or 0 to 5 Volts. 
The depth sensor is user configurable by means of  internal dip switches. Several configurations are 
possible and allow the depth sensor to work with as many different type of systems as possible. 
 
Accurate measurement of snow depth poses many difficult problems. The Judd Communications Depth 
Sensor has proven very effective in measuring snow depth, which makes it well suited for other various  
applications. 

 

 

Содержание Depth Sensor










Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды