Direct
Alert
Quick Setup Guide
1
800-321-6221
Components
1. ISTATION Transmitter (With power supply & antenna)
2. Ethernet Cable
3. DB9 Cable (Optional for POS Integration)
4. USB Keyboard (Optional)
Equipment Setup
Step 4
OPTIONAL (For POS Integration):
Connect the serial cable to the serial port on the back of the ISTATION
and then tighten the screws.
Step 5
OPTIONAL:
Insert the USB connector from the keyboard into the back of the
transmitter
.
Step 1
Connect the antenna to the transmitter.
Twist to lock in place.
Step 2
Plug the power supply into the transmitter
and then into a standard 110-240v outlet.
A
surge protector is recommended for all
Transmitters and Charging Bases.
Step 3
Plug one end of the Ethernet cable into the
back of the transmitter and then the other
end into your network.
1.
2.
3.
4.
Optional items are not included unless purchased before shipping.
