Jtec Radiowave METER EXTRA 300 Скачать руководство пользователя страница 1

 

1

 

3.2 METER EXTRA 300 & 330L ARF 

Manual 

 
Please read through the entire manual first.  It contains important instructions and warnings concerning the 
finishing of the model.   

 
 

WARRANTY AND PRODUCT DISCLAIMER 

  

Radiowave Hobby Ind. guarantees this kit to be free from defects in both material and workmanship at the 
date of purchase.  This warranty does not cover any component parts damaged by use or modification.  IN 
NO CASE SHALL RADIOWAVES' LIABILITY EXCEED THE ORIGINAL COST OF THE 
PURCHASED KIT.  Further Radiowave reserves the right to change or modify this warranty without 
notice. 
  
In that Radiowave has no control over the final assembly or material used for final assembly, no liability 
shall be assumed nor accepted for any damage resulting from the use by the user of the final user-assembled 
product.  By the act of using the user-assembled product, the user accepts all resulting liability. 
  

IF THE BUYERS ARE NOT PREPARED TO ACCEPT THE LIABILITY ASSOCIATED WITH 

THE USE OF THIS PRODUCT, THEY ARE ADVISED TO RETURN THIS KIT IMMEDIATELY 

IN NEW AND UNUSED CONDITION TO THE PLACE OF PURCHASE AT THE BUYERS 

EXPENSE. 

Содержание METER EXTRA 300












Отзывы: