Page 1/4
The Quality Connection
YRS
SERIES
HAND CRIMP TOOL
Instruction Manual
.
Страница 1: ...Page 1 4 The Quality Connection YRS SERIES HAND CRIMP TOOL Instruction Manual ...
Страница 2: ...of wire terminal and tool are used 2 The tool does not have a release for the ratchet Once a cycle is started it must be completed If the terminal is not positioned properly or there is a foreign body stuck in the crimp do not force the handles closed Doing so will likely break parts on the tool Instead remove the adjustment pin and the upper die After removing the die the process can be complete ...
Страница 3: ...between the terminal guide and the guide plate The insulation barrel of the terminal must be fed into the groove on the guide plate as shown in Fig 3 Feed the terminals into the tool by hand until the first terminal is in the crimping position over the anvils 6 With the terminal in the crimping position lightly squeeze the handles together until the upper crimper touches the insulation barrel Do n...
Страница 4: ...the dies 2 Be sure the wire does not come off the stripper in the upper die when crimping 3 If it seems as if the cycle will not complete without excessive force stop and remove the adjustment pin from the upper die This will prevent the dies from being damaged In line with a policy of continual product development JST reserves the right to change the specifications of the goods described in this ...
