Just Stack It!
HANGING WARDROBE Assembly Instructions
Just Stack It! Hanging Wardrobe Assembly Instructions-061122.docx
2 |
P a g e
INSTALL THE HANGING ROD
Place the rod into both brackets as shown with the first
O-ring against the inside of the bracket on one side.
The rod should be flush with the outside edge of the
Crosspiece Rail.
INSTALL THE SECOND O-RING
Put the second O-ring on the oppososite side of the
bracket to capture the rod in place. You only need O-
rings on one of the brackets.
BAG AND HANG YOUR CLOTHES
Cut a small opening in the bottom of the clear bag.
Reach through the hole and grasp a bundle of hangers.
Spread the bag down over the clothes.
INSTALL ADDITIONAL WARDROBES
If needed, add additional wardrobe kits. Place the
brackets 2’ apart from the first set. Note the brackets
are on the inside of the Crosspiece Rail.