Just Stack It!
HANGING WARDROBE Assembly Instructions
Just Stack It! Hanging Wardrobe Assembly Instructions-061122.docx
1 |
P a g e
ASSEMBLY INSTRUCITONS
1.
Measure 1’ from the inside edge of the Platform End Rail on the Crosspieces and hang brackets there.
2.
Install the one screw in each bracket to secure them to the Crosspiece Rail.
3.
Install an O-ring on the rod and insert the rod into the brackets.
4.
Secure the rod in the brackets using the second O-ring or packing tape.
5.
Cover your hanging clothes with the clear plastic bags and hang them on the rod.
6.
Install additional Wardrobe KITS as needed 2’ away from each other on the Crosspiece Rail.
INSTALL THE FIRST SET OF ROD BRACKETS
Hang the bracket on the inside of Crosspiece Rail
approximately 1’ from the inside edge of the End Rail.
Install the second bracket on the opposite Crosspiece
Rail. Install the one screw in each bracket.
INSTALL THE FIRST O-RING ON THE HANGING ROD
Place an O-ring on the rod approximately 1-1/2” from
the end of the rod.