JRC JMA-610 Series Скачать руководство пользователя страница 91

Страница: 91 / 172

3.6 DISPLAY USER MAP

3-43

3.6.5 Operate User Map File (File Operations)

[I] Loading navigation data (Load User Map)

Procedures

1 Insert a flash memory card into the card slot.

In the case of loading the data from internal memory, a card is not necessary.

2 Press [MENU] key.

Select 8.Next and press [ENTER] key.

Select 4.NAV Information and press [ENTER] key.
Select 5.File Operations and press [ENTER] key.

3 Select 1.Select Card Slot and press [ENTER] key.

4 Select the slot number which you inserted a flash memory card or

3.Internal and press [ENTER] key.

5 Select 2. Load Mode and select Add or Overwrite and press

[ENTER] key.

Add and Overwrite of the Load Mode items are switched.

When Add is selected, new data is added to the saved data. When Overwrite is
selected, the saved data is overwritten.

6 Select 3.Load and press [ENTER] key.

The list of navigation data saved in the system will be displayed.

7 Select numeric icon corresponding to the file to be loaded.

Confirmation Window will appear.

8 Select 1.Yes and press [ENTER] key.

The selected navigation data will be loaded and displayed of the display.

9 Press [ MENU] key.

Menu will be closed.

Содержание JMA-610 Series













































































































































































Результаты поиска

Содержание JMA-610 Series

Отзывы:

JRC JMA-610 Series, Инструкция по эксплуатации, Страница: 91 / 172

Результаты поиска

Содержание JMA-610 Series

Отзывы: