JRC JMA-610 Series, Инструкция по эксплуатации, Страница: 7 / 172

- v -
Set the safety switch for stopping the scanner unit to
the OFF position.
Otherwise, an accidental contact with the rotating
scanner unit may cause injury.
Turn off the main power source before starting
maintenance.
Otherwise, an electric shock or injury may be caused.
Turn off the main power if you need to be near the
scanner unit for maintenance or inspection purposes.
Direct exposure to electromagnetic waves at close
range in death or serious injury.
WARNING
When cleaning the screen, do not wipe it too strongly
with a dry cloth. Also, do not use gasoline or thinner
to clean the screen. Otherwise the screen surface may
be damaged.
Never carry out internal inspection or repair work of the
equipment by users.
Inspection or repair work by unauthorized personnel
may result in fire hazard or electric shock.
Ask the nearest branch, business office or a dealer for
inspection and repair.
Turn off the main power before maintenance work.
Otherwise, an electric shock may result.
Turn off the main power before cleaning the equipment.
Especially, make sure to turn off the indicator if a
rectifier is used. Otherwise, equipment failure, or
death or serious injury due to electric shock may result,
because voltage is outputted from the rectifier even
when the radar is not operating.