JRC JMA-610 Series Скачать руководство пользователя страница 56

Страница: 56 / 172

3-8

3.3.4 Adjust Brilliance of Information on Radar Display

(Brilliance Setting)

Brilliance can be adjusted for each item of information (shown below) on the radar display by operating the
menu.

SHM, RANGE RINGS, VRM, EBL & P-LINE, BEARING SCALE, CHARACTER, AIS SYMBOL &

VECTOR, OWN MARK, RADAR VIDEO & TRAILS, MARK & LINE

Procedures

1 Press [MENU] key.

Put the cursor on [1.BRILLIANCE] and press [ENTER] key.

The Brilliance Setting menu will appear.

2 Put the cursor on the item to be adjusted and press [ENTER] key.

The brilliance levels menu will appear.

3 Select the level to be set and press the [ENTER] key.

The selected brilliance level will be set.

Exit

1 Press [MENU] key.

The menu will be closed.

Note:

The brilliance levels set here are saved in accordance with the day/night mode.

3.3.5 Adjust Sound Volume (Buzzer Volume)

Procedures

1 Press [MENU] key .

Put the cursor on [3.SETTING] and press [ENTER] key.

The setting menu will appear.

2 Put the cursor on [1.BUZZER LEVEL] and press [ENTER] key.

The buzzer level’s menu will appear.

3 Select the volume number to be set, and press [ENTER] key.

The selected volume level will be set.

Exit

1 Press [MENU] key.

The menu will be closed.

Содержание JMA-610 Series













































































































































































Результаты поиска

Содержание JMA-610 Series

Отзывы:

JRC JMA-610 Series, Инструкция по эксплуатации, Страница: 56 / 172

Результаты поиска

Содержание JMA-610 Series

Отзывы: