JRC JFS-280, Инструкция по эксплуатации

Страница: 132 / 328

5 Adjusting How Images Appear 5-18
5
5.2.4.1.1 MIN VR
This is a menu item for doing settings for MIN VR for the volume of sensitivity.
Normally, use the standard setting values the way they are.
Operating Procedure Press the keys "7 → 4 → 1 → 1" to go to MIN VR
settings
In the "TVG" menu, turn the [MULTI] knob to move to
"1. MIN VR". Press the [MULTI] knob to open the value
input key menu.
The initial setting is set to 128.
The setting range is between 0 and 255, and can be
set in steps of 1. The variable range for the volume of
sensitivity becomes narrower by increasing this value.
It is normally set to the initial value.
5.2.4.1.2 GOS
Always use GOS at 0.
Operating Procedure Press the keys "7 → 4 → 1 → 2" to go to GOS settings
In the "TVG" menu, turn the [MULTI] knob to move to
[2. GOS]. Press the [MULTI] knob to open the value
input key menu.
The initial setting is set to 0.
The setting range is between 0 and 15, and can be set
in steps of 1. The variable range for the volume of
sensitivity becomes narrower by increasing this value.
It is normally set to the initial value.