JRC Alphatron Marine AlphaPhone 100 AS, Инструкция по установке и эксплуатации, Страница: 11 / 19

3.2 Operation at on-hook state
3.2.1 Receiving incoming FSK & DTMF caller ID
When receiving a phone call, the LCD will display the phone number together with the information of name, date, time,
and the number if user had applied for the Caller ID service.
• A new number will carry a “NEW” icon,
• A repeated number will carry a “REP” icon.
• A message waiting will carry a # icon.
• A private call (when the caller prefers his/her number to be hidden) will display “PRIVATE CALL“.
• A call out of service will display “OUT OF AREA”.
• An incorrect incoming signal will display “NOT AVAILABLE”.
When the receiving phone call is a FSK format caller ID signal, the current month, date and time display will be updated
(while the year remains unchanged).
If there is no information from exchange, the name shown on the LCD will be the same as in the phone book.
3.2.2 Checking incoming caller ID
User can use UP or DOWN key to view the information of the incoming calls including phone number, date, and time.
3.2.3 Re-dialing an incoming caller ID
For a local call, just press the SPEAKER / key when the caller’s number is on display.
3.2.4 Checking outgoing calls
User can use REDIAL/ key to view the outgoing numbers and duration of each call. To re-dial, press SPEAKER /
key or pick-up HANDSET directly.
3.2.5 Checking phone book
For checking the phone book perform the following actions:
• Press PHONE BOOK key and input the first character of name.
• By pressing PHONE BOOK key again, you can view the corresponding telephone numbers.
• When no character input, you can use PHONE BOOK key to view in sequence.
•
To re-dial, press SPEAKER / key directly.
3.2.6 Pre-dialing
Enter a phone number and press SPEAKER / key to dial out.
Note For any input mistakes, press C key to correct.
3.2.7 Babycall dialing
Press any key except the OK key to dial out the pre-set number when BABY CALL function has been turned on.
11 | Telephone Operation