www.jps.com.tw
121
14.4.4 BP2P Mode:Basic Point To Point:Block
※ 14.4.4.1 BP2P Mode:Basic Point To Point:Connection
※ 14.4.4.2 BP2P Mode:Basic Point To Point:Internal Block
User Set command
Actual Command
Pr.002 Select Operation Mode
Pr.002 =4 BP2P Mode
Pr.002 =0
Speed/Torque Mode
DIx(14):Position-SW0
DIx(15):Position-SW1
DIx(30): P2P FWD Jog
DIx(31): P2P REV Jog
P2P Other Switch Command
Pr.310:AB Pls Setting
BP2P Machine Factor Setting
Pr.388:BP2P Mode-00
BP2P Mode Select
Pr.403:BP2P Mode-15
To
Pr.372:BP2P Profile-00
BP2P Ramp Profile Select
Pr.387:BP2P Profile-15
To
Pr.274:BP2P Length-00
BP2P Position Setting
Pr.304:BP2P Length-15
To
DIx(16):Position-SW2
DIx(17):Position-SW3
DIx(018):P2P Trigger
DIx(102):Servo-On