![background image](http://html1.mh-extra.com/html/jpa/diadens-dt/diadens-dt_manual_2027956076.webp)
PURPOSE AND APPLICATION OF TEST PROGRAM
The TEST program is designed to assess the functional condition of organs and the
bodily system by means of searching for zones where the skin impedance will be very
different from that in adjacent areas (latent Trigger zones), as well as for treating the
skin areas symmetrical to the complaint projection.
The energy range of the treatment is either minimum (ER-1) or comfortable (ER-2). The
treatment method is stationary; the electrodes are moved after an audio signal. The
TEST program operates at the frequency 10 Hz.
To enter the TEST program, switch on the device and set the frequency to 10 Hz
(pressing the FR button until F10 appears on the screen). Place the
electrodes onto the skin. Set the intensity level of the device (when the device is
switched on, the intensity is set to zero). To increase the intensity, press the IN-
button repeatedly until the patient experiences a light pleasant tingling
sensation.
!
NOTE! The level of intensity is controlled
subjectively according to the patient's sensations
when the skin surface comes into contact with the
electrodes. The pain sensation threshold should not
be exceeded. When switching the device on,
minimum energy range will be automatically set.
Having stabilised the skin impedance of the skin under the electrode, the device emits an
audio signal. Subsequently, on the high part of the screen a T value of the device's time
spent on the zone is displayed. Write down the number. Next the device should be
moved to an adjacent zone. Those areas where the treatment time of the device differs
considerably from that in adjacent areas either positively or negatively are referred to as
latent Trigger zones. These zones should be treated using the
THERAPY program for 3-5 minutes at the frequency 60 or 77 Hz.
If the treatment time of the TEST program is over 1 minute, the electrodes should be
moved to an adjacent area while continuing the process. This zone should be regarded as
the latent Trigger zone. Move to the next zone for testing.
Содержание DiaDENS-DT
