Joyner TROOPER-T2, Руководство пользователя, Страница: 37 / 225

37
engine not started. Repeat it until the engine is started. Release the key and the
clutch pedal when the engine starts. Keep engine running for 1-2 minutes before
driving.
z Do not attempt to start or operate the engine until completely familiar with the
location and use of each control necessary to operate this vehicle. The operator
must know how to stop this machine before starting and driving.
z Each time prior to starting the engine, check the throttle assembly to ensure that
when pedal is pushed all the way forward the assembly is working smoothly and
returns to idle when released. Do not operate if pedal or engine throttle linkage fail to
return to idle. If unable to correct the problem through lubrication, adjustment or
replacement of worn parts, contact your dealer for assistance.
z Before you start the engine, check that the parking brake is engaged, and the gear
shift lever is in neutral. Trying to start the engine in gear may damage the starter
motor, clutch or gearbox.
z Release the key at once if the engine starts. Holding the key in start position when
the engine is running will cause damage to the starter motor.
z If the engine does not start after 5 seconds, a second attempt to start the engine can
be allowed. Improper operation will damage the engine.
Stop engine
1. It is strongly recommended to stop vehicle before stop engine.
2. Make sure the shift lever in neutral position.
3. Turn the key clockwise to the “off” position.
z Before driving this vehicle, test the Engine Stop key to assure that it is operating
properly.
Passenger
The vehicle allows for two riders only.
The passenger should wear seat belt all the time.
Break-in
The first month is most important in the life of your vehicle. Proper operation during this
break-in period will help assure maximum life and performance from your new vehicle.
The following guidelines explain proper break-in procedures.
1. After the engine starts, the engine is not allowed in high speed in the neutral gearshift.
2. Drive vehicle from stop to low speed slowly.
3. Avoid braking strongly.
4. Do not exceed the vehicle speed on the below schedule.