background image

3130IF -VoIP User Manual V1.2 

  28

 

Configure local signal port, the default is 5060

this port will go into effect 

immediately, the SIP call will use the modified port for communication after 

modification

 

Configure expire time of SIP server register, the default is 600 seconds. If the 

expire time that server requires is more or less than that configured by the 

phone, the phone can automatically modify it to the recommended time limit 

and register; 

 

Configure detection interval time of the server, if the phone enables SIP 

detection server function, the phone will detect once for whether the server has 

response every other detection interval time; 

 

Configure enable/disable register; 

 

Configure to enable public outbound proxy. If proxy server has been enabled, 

the phone will consider the user as using outbound proxy automatically. If the 

configuration has been disabled, the phone can still be registered to the 

server ,but can't make SIP call; configuration of registered call by the phone will 

not have impacts on SIP point-to-point call; 

Содержание 3130IF -VoIP SERIES























































Отзывы: