1.8“ TFT Display
Published: 08.11.2018
Copyright by Joy-IT
8
3.2 INSTALLING THE SOFTWARE
If you are already using a current Raspbian system on your Raspberry, you can skip this step and proceed
to step 2.3 immediately.
Install the current Raspbian Image on your SD card using the "Win32 Disk Imager" program, which you
can download from the following
Once the installation is complete, you can remove the SD card, insert it into your Raspberry Pi and start it.
3.3 INSTALLING THE MODULE
First you have to modify the
config.txt
file.
Open a terminal window and open the file with the following command:
Add the following line to the end of the file.
You can save your input with the key combination
CTRL+X
and exit the editor with
CTRL+O.
sudo nano /boot/config.txt
dtparam=spi=on
Содержание RB-TFT1.8
Страница 1: ...1 8 TFT Display 3...