[Jovy Systems Limited]
Operating Manual
[Jetronix-Eco]
[Version 1.01]
Jetronix-Eco Operating Manual
Page 16 of 22
©Jovy Systems 2013. All rights reserved
4.2
Process Profile Parameters
4.2.1
Create
Jetronix-Eco Process Profile divided into optional 1 to 4 stages, user can
create a process profile of at least 1 stage. Preheat stage is preprogramed
and heaters power predefined, while the other user define the hetars power
for each zone.
From Main Menu choose Profiler
and press Enter
. Then, create a profile
.
The first screen
to Define the process profile stages, if the
preprogramed (preheat) stages needed, press ON. If the process pr ofile
stages all to be defined by user, the Preheat stage should be
OFF
The required inputs for pre heat stage is the stage ends temperature and
dwell time needed at this temperature
.
