
jotron.com
Page 39 of 52
3.
Press down and hold in place the spring-loaded bracket plate and
remove the hydrostatic unit by sliding it out of its locking slot.
4.
Install the new hydrostatic unit while continuing holding down
the spring-loaded bracket plate and sliding the unit into its locking
slot.
5.
Mount the EPIRB in the bracket. See chapter 4.5 for instructions.
6.
Verify that there is no gap between the bracket and cover.
6.8
Shore based maintenance (SBM)
Shore-based maintenance of EPIRBs should be carried out in accordance
with IMO guidelines as set out in MSC/Circ.1039 as amended.
Satellite EPIRBs may have mandatory requirement of Shore Based
Maintenance (SBM) either by IMO SOLAS or national requirements at
intervals specified by flag administration, not exceeding 5 years.
SBM shall be performed latest by the date indicated on the SBM label on
the EPIRB,
by Jotron SBM approved Partner.
The SBM label is located at the battery housing, and is shown in the figure
below:
Only Jotron HRU kit is acceptable for use. Any use of
counterfeit spare parts will invalidate the product type
approval certificates, and warranty will not apply.
Содержание Tron 40AIS
Страница 1: ...Tron 40AIS Float free EPIRB User manual...
Страница 7: ...jotron com Page 7 of 52 3 1 Tron 40AIS EPIRB...
Страница 20: ...jotron com Page 20 of 52...