A
B
Back of Shield
Step 5
Figure 1
Instruction Manual
Face Shield
Peel the protective film from both sides of the face shield and clear strap.
Slide the clear strap through the two slots on the shield.
Line up the holes in the shield and clear strap, and secure them in place by pushing a rivet through the holes on
both sides of the clear strap.
Insert the blue strap through slot A of the clear strap. Be sure end of the blue strap is inserted into slot A from the
front of the face shield.
Next, loop the blue strap through slot B. Be sure the end of the blue strap is on the inside, touching the head.
Repeat Steps 4 and 5 on the other end of the blue strap.
If necessary, adjust the length of the blue strap by pulling either end until the face shield is comfortable and secure.
Face shield assembly video:
https://www.jorvet.com/product/jorvet-face-shield-20-pk/
P.
800.525.5614
F.
970.663.5042
1450 N. Van Buren Avenue, Loveland, CO 80538
4
1
2
3
5
6
7
Step 1
Step 3
Step 2
Step 4
Step 3
Front of Shield
Step 5
Step 4
A
B
