1” VERSION MANUAL OVERRIDE
VALVE INDICATOR 1”
You can manually open and close the valve by pushing the actuator towards the ball
valve and turning it left or right 90°.
Please note: After a manual override the actuator will be 90
°
rotated versus the ball
valve. All indicators and settings will become reversed, meaning the pre-programmed
OPEN and CLOSE settings will become reverse, i.e. OPEN will become CLOSED and
CLOSED will become OPEN.
RED = OPEN
No colour (metal) =
CLOSED
2” VERSION MANUAL OVERRIDE
VALVE INDICATOR 2”
You can manually OPEN and CLOSE the ball valve.
1. Push down and turn the switch from ‘AUTO’ to ‘MAN’.
2. Use a 13mm wrench to OPEN or CLOSE the ball valve.
RED ARROWS = OPEN
BLUE ARROWS = CLOSED
TECHNICAL SPECIFICATIONS
Pressure range
0 - 16 bar
0 – 230 psi
Supply voltage options
115VAC
or
230VAC 50/60Hz. (please check label)
Opening/Closing duration 1” VERSION:
30 sec. / 90°
2” VERSION:
105
sec. / 90°
Medium temperature
1 - 100 °C
34 – 210 °F
Ambient temperature
1 - 50 °C
34 – 120 °F
Inlet/Outlet connections
1“ or 2“ (BSP or NPT)
Valve housing material
Brass, nickel plated
Serviceable valve
Yes
Manual override
Yes
Environmental protection
IP54 (NEMA 13)
DIMENSIONS
(inches)
Red arrows =
OPEN
Blue arrows =
CLOSED
WIRING
1”
version
2”
version
