TRANSMIT 2
STEREO BALANCED LINE OUTPUTS
1
INTRODUCTION
Whether it's in the studio or on a live stage,
keeping audio interconnections free from
unwanted hum and interference can be a
challenge. Balanced lines are the proven solution
to this problem.
Conventional balanced output solutions often
rely on transformers providing galvanic isolation
to mitigate the effects of ground loops.
Unfortunately, these components are bulky,
expensive and colour the sound (often
unfavourably, especially in the low end).
Instead, Transmit 2 (or TX2 for short) takes a fully
solid-state approach. Offering a stereo pair of XLR
balanced outputs, it ensures that the sonic clarity
of your carefully planned modular system is not
lost in its interface to the outside world.
Eengineered to provide massive headroom while
retaining extremely low noise and distortion,
Transmit 2’s circuitry
incorporates
low-
impedance design practices, radio-frequency
(RF) filtering and premium balanced drivers to
provide transformer-like interconnect
performance in a compact and affordable
module. And thanks to the electrostatic (ESD)
and phantom power discharge protection, it’s
rugged enough to survive the rigours of
performing on the road.
Adjusting the main output level is a breeze
thanks to the dual peak-responding LED meters.
A high-end headphone amplifier is included as
well, controlled by a separate level knob. It can
deliver the voltage and current required to
power practically any headphones, regardless of
the impedance or driver technology. This 3.5 mm
stereo socket can function as an auxiliary stereo
line output or even drive small passive speakers,
making Transmit 2 an all-round flexible answer
to all your output needs.
CONTENTS
In the Transmit 2 box, you’ll find:
Product card, stating serial number and
production batch.
16-to-10-pin Eurorack power cable.
Mounting hardware: two black M3 x 6 mm
hex screws, two black nylon washers and a
hex key.
And finally, the module itself, in a protective
cotton bag.
If any of these items are missing, please contact
your dealer or [email protected].