11.4. Warning interface (TWI)
WARNING
If you switch off the safety system when
manual operated stabiliser extensions/tiltable
legs are not locked in the transport position,
and/or if the first boom angle exceeds a
certain specified angle, the system will give
you a warning.
The vehicle must not be moved.
• A warning, visible and audible from the driving position
for transport, indicates when the crane height exceeds a
predetermined maximum and when the manual operated
stabiliser extensions/tiltable legs are not locked in the
transport position.
• The audible warning can be silenced by an
acknowledgement button [option] or by a signal
indicating that the parking brake of the vehicle is
engaged.
The vehicle must not be moved
1. Switch the system on, put the crane into the transport position.
2. Switch off the system. The vehicle may be moved.
DANGER
After use always put the crane into the transport position! When you have to park
the boom on the load space, or over the load, secure the boom and the lifting
accessories to prevent any unintentional movement of the crane and the lifting
accessories.
11.5. Remove the crane from the vehicle (console mounted)
WARNING
Ensure that there are no unauthorized persons in the immediate vicinity of the
crane. When attach/removeing the crane to the vehicle people can suffer fatal
crushing injuries!
1. Make sure that the ground where the crane will be parked is firm.
2. Park the carne on the ground, use ground plates if necessary.
3. Fully extend and set the stabilisers to the ground.
4. Rise the crane from the transport support.
5. Disconnect the hoses from the hose hook.
Ending crane operation
Jonsered 1188S CE
67
